Gold necklaces are a symbol of wealth, and there are many people who like to wear gold necklaces in life. Due to the chemical nature of gold, gold necklaces are not easy to rust, but if they are dirty, they are not so easy to clean. How to clean the gold necklace? The following is a collection of cleaning methods for gold necklaces in several situations. Friends with gold necklaces can find out!
Method of cleaning dust
The easiest way to clean the dust and fouling of gold jewelry is to gently scrub with a soft brush dipped in hot water, it is best to use a cotton pad dipped in soapy water and absolute alcohol for scrubbing, but it should not be used. Abrasive particles (such as toothpaste, polishing paste, fine sandpaper or fine sand cloth, etc.) scrub to avoid reducing the weight of gold and causing losses.
White spot cleaning method
Some of the cosmetics on the market contain trace amounts of mercury (mercury). Por exemplo, freckle cream often contains phenyl hydroxymercury and mercury dichloride. White spots or whitening will appear after contact with gold jewelry. At this time, the cut should not be scraped with a knife or sandpaper. As long as the jewelry with white spots or whitening is placed in the fire and baked, then wiped with a soft cloth, the gold jewelry will restore its original luster.
Immersion cleaning method
First take 1000 ml of warm water (40~C), then add 200 ml of glacial acetic acid to make an aqueous solution, then put the gold jewelry into this cleaning solution and soak for 10 minutes, then scrub with a brush, and finally rinse with clean water. When you are hesitant about which wedding jewelry to choose, just wear a classic pearl necklace. When choosing a perfect pearl necklace as wedding jewelry, first of all, make a relevant reserve of pearl knowledge. It is essential to buy a high-quality pearl necklace.
Gold necklace cleaning method
When washing the pure gold necklace, put the pure gold necklace in the container first, then add water to the container, and then add a small amount of ammonia, then close the mouth tightly, shake it vigorously back and forth, and then take out to dry. When wearing a gold necklace, you should also maintain the snap switch. Regularly drip a little sewing machine oil to the switch to prevent the micro spring in the switch from rusting.
Wiping method of developing powder
The dirt on the surface of gold jewelry will dim the luster. At this time, you can use the developer powder to develop the photo, mix it with 30-40~C warm water into the developer solution, and then double the water to dilute it. Put the dirty gold jewelry in it for 4 para 6 minutes, use soft hair Brush the dirt and rinse it with clean water several times. If you use a fine woolen cloth dipped in nail polish, the jewelry will be brighter.
Send feedback
History