보석 뉴스

wholesale jewellery suppliers How to distinguish real pearls and fake pearls?

게시 ~에 의해 Kingjy

(1) 직관적인 방법: the method of direct observation with naked eyes. This is also the most common and actual identification method. The inspection can be carried out from the following four aspects:

①In terms of color, 모양, 크기, 광택, 등. If it is a bead or a batch of pearls, for real pearls, they are inconsistent in any way, while artificial pearls, because they are produced by a machine, are often consistent.

② Observe its luster carefully. If it is a real pearl, because it is formed by interference, its pearl luster can reflect iridescence and colorfulness, like gasoline dripping on the road after the rain; while the fake pearl, because the luster is formed by the reflection of the surface paint, its luster There is no such iridescent, single tone.

③ Observe the hole where the pearl is drilled. Artificial beads have a small bump or some traces of paint peeling off the edge of the orifice, while real pearls do not have this phenomenon.

④ Observe close to the light source. The transparency of real pearls is often better than that of fake pearls, and it reflects the feeling of moisture; fake pearls have a rough and dry feeling.

(2) Sensation: It is a method of feeling through organs such as hands and tongue. Real pearls produce a kind of coolness by hand. Rub lightly with your hands or rub lightly with the edge of your teeth. Those who feel smooth are artificial beads, and those with uneven texture or sandy feel are real pearls.

(3) Magnifying glass observation method: Observing with a magnifying glass of 10 타임스, the growth texture can be seen on the surface of natural beads or cultured beads. The shape of aragonite crystals is like the shape of a sand dune blown by the wind. Artificial beads can only observe eggshell-like coatings, and the coating particles are uniform in size and not very smooth.

(4) Ultraviolet fluorescence method: Natural beads and cultured beads will produce fluorescence (밝은 노란색, pale white) under ultraviolet light, which is caused by the protein in the bead layer. 정상적인 상황에서, artificial beads do not produce fluorescence.

(5) Hydrochloric acid reaction method: This method must pay attention to two principles, one is low concentration, 일반적으로 <1%; 두번째, the dosage is small, the diameter of hydrochloric acid beads should be less than 1mm, natural beads or cultured beads will be immediately in hydrochloric acid Foaming, producing carbon dioxide; while general artificial beads have no obvious reaction, because this method is destructive, this method should be avoided as much as possible. 게다가, in order to reduce the damage to the pearl, it can be observed under a microscope to reduce the corrosion area and reduce the degree of damage. After using this method, the pearls should be rinsed off immediately.

 

OEM/ODM 보석 제조업체 디자인 사용자 정의 보석

시작합시다 : mo@kingjy.com

 

광저우 징징 맞춤형 도매 반지 목걸이에 중점 925 보석류,스털링 실버 골드는 18K로 도금되었습니다,14케이,24K 옐로우 골드,화이트 골드와 로즈 골드.,고객의 요구 사항에 따라 레이저 조각으로 로고 브랜드 또는 기타 단어.

월별 생산 능력은 최대입니다 50,000 조각 팔찌 목걸이 귀걸이 링 보석.,보석 체인점,콘센트 상점,보석 도매기,트레이더 및 보석 브랜드 회사,Professional은 고품질의 맞춤형 보석 및 대량 생산을 제공합니다. 925 스털링 실버 보석 서비스.