Berita perhiasan

grosir 925 silver jewelry Precautions for planting wax trees in jewelry making

Diposting di oleh Kingjy

Planting wax trees is the first step in forming the jewelry after its modeling is completed. It is to glue the wax film of the jewelry together one by one, like a tree. In the process of planting wax trees, the following issues should be paid attention to.

① When planting wax trees, try to avoid mixing thick and thin pieces together, because it is not easy to guarantee both at the same time during casting.

② Choose the angle between the wax piece and the wax stick according to the shape of the wax piece to ensure that the molten metal can flow calmly and quickly. Umumnya, the direction of the wax mold is inclined upward. This angle can be adjusted appropriately according to the casting method, the size of the wax mold and the shape of the wax piece. In centrifugal casting, the wax mold and the wax core are at 45 ke 60 degrees, and in vacuum casting, the wax mold and the wax core are at 70 ke 80 degrees, which helps to control the solidification direction.

③ Before planting wax trees, the rubber chassis should be weighed. After planting the wax tree, weigh it again. Subtract the results of these two weighings to get the weight of the wax tree. The weight of the wax tree is converted into the weight of the metal according to the ratio of the density of the paraffin wax to the cast metal, and you can estimate how much metal is needed for casting. Umumnya, perak: wax=10:1; 14K: wax=14:1; 18K: wax=16:1; 22K: wax=18:1.

④ After the wax tree is finished, it is necessary to check whether the wax patterns have been welded firmly. If the welding is not strong, the wax mold will fall off during plaster casting, which will affect the casting process. Check whether the connection between the water line of the wax piece and the wax core is smooth, avoid angles or leave spaces. Akhirnya, check whether there is enough space between the wax molds. If the wax molds are stuck together, they should be separated; if the wax tree has dripping wax, it should be repaired with a blade.

 

Desain Produsen Perhiasan OEM/ODM Kustom Perhiasan Anda Sendiri

Mari kita mulai : mo@kingjy.com

 

Guangzhou Jingying Fokus pada Kalung Cincin Grosir Kustom Gelang Anting Sterling Silver 925 perhiasan,Sterling Silver Gold berlapis 18K,14K,24K emas kuning,emas putih dan emas mawar.,merek logo atau kata -kata lain dengan ukiran laser sesuai dengan persyaratan pelanggan.

Kapasitas produksi bulanan kami terserah 50,000 Potongan Gelang Kalung Anting -anting Cincin Perhiasan.,Toko rantai perhiasan,toko outlet,Pedagang perhiasan,Perusahaan Merek Pedagang dan Perhiasan,profesional menyediakan membuat perhiasan khusus dan produksi massal berkualitas tinggi 925 Layanan perhiasan perak sterling.