(1) Intuitive method: the method of direct observation with naked eyes. This is also the most common and actual identification method. The inspection can be carried out from the following four aspects:
①In terms of color, tvar, velikost, gloss, atd. If it is a bead or a batch of pearls, for real pearls, they are inconsistent in any way, while artificial pearls, because they are produced by a machine, are often consistent.
② Observe its luster carefully. If it is a real pearl, because it is formed by interference, its pearl luster can reflect iridescence and colorfulness, like gasoline dripping on the road after the rain; while the fake pearl, because the luster is formed by the reflection of the surface paint, its luster There is no such iridescent, single tone.
③ Observe the hole where the pearl is drilled. Artificial beads have a small bump or some traces of paint peeling off the edge of the orifice, while real pearls do not have this phenomenon.
④ Observe close to the light source. The transparency of real pearls is often better than that of fake pearls, and it reflects the feeling of moisture; fake pearls have a rough and dry feeling.
(2) Sensation: It is a method of feeling through organs such as hands and tongue. Real pearls produce a kind of coolness by hand. Rub lightly with your hands or rub lightly with the edge of your teeth. Those who feel smooth are artificial beads, and those with uneven texture or sandy feel are real pearls.
(3) Magnifying glass observation method: Observing with a magnifying glass of 10 časy, the growth texture can be seen on the surface of natural beads or cultured beads. The shape of aragonite crystals is like the shape of a sand dune blown by the wind. Artificial beads can only observe eggshell-like coatings, and the coating particles are uniform in size and not very smooth.
(4) Ultraviolet fluorescence method: Natural beads and cultured beads will produce fluorescence (světle žlutá, pale white) under ultraviolet light, which is caused by the protein in the bead layer. Under normal circumstances, artificial beads do not produce fluorescence.
(5) Hydrochloric acid reaction method: This method must pay attention to two principles, one is low concentration, generally <1%; second, the dosage is small, the diameter of hydrochloric acid beads should be less than 1mm, natural beads or cultured beads will be immediately in hydrochloric acid Foaming, producing carbon dioxide; while general artificial beads have no obvious reaction, because this method is destructive, this method should be avoided as much as possible. Navíc, in order to reduce the damage to the pearl, it can be observed under a microscope to reduce the corrosion area and reduce the degree of damage. After using this method, the pearls should be rinsed off immediately.
OEM/ODM Výrobce šperků design vlastní vaše vlastní šperky
Začněme : MO@kingjy.com
Guangzhou Jingying se zaměřuje na vlastní velkoobchodní prstencové náhrdelníky náramky Sterling Silver Silver 925 šperky,Sterling Silver Gold s 18k,14K,24K žluté zlato,bílé zlato a růžové zlato. Je schopen vlastní stříbrné šperky mincovní,Značka loga nebo jiná slova laserovým gravírováním podle požadavku zákazníka.
Naše měsíční výrobní kapacita je na 50,000 kus náramky náhrdelníků náhrdelníky prstencové šperky.,Šperky řetězové obchod,prodejny,Velkoobchod s šperky,Společnost obchodníků a šperků,Profesionální poskytujte vytvořit přizpůsobené šperky a hromadná výroba vysoké kvality 925 Sterling Silver Jewelry Service.













