Get your custom ring design and custom made 18k gold plated silver ring
When processing our products, there will be a lot of processes that need to be used, so that we can make satisfactory products. على سبيل المثال, our jewelry is the same, so the processing of jewelry requires sandblasting. What is the craft!
The sandblasting process is to partially blast the surface of the metal jewelry according to the design requirements to make the polished surface of the metal jewelry form a sharp contrast to enhance the beauty of the line art of the jewelry. There are two types of blasting processes: one is dry sand and the other is water sand.
1. Main tools required for sandblasting:
1. Sandblasting machine; 2. Air compressor; 3. Emery (quartz sand); 4. Protective tape or wax
2. Operation steps:
1. Seal the polished and cleaned jewelry parts that do not require sandblasting with protective wax or protective tape for protection. When sticking protective tape or spotting protective wax, the lines should be smooth and neat.
2. Select the appropriate thickness of emery as required and place it in the sandblasting machine. Then adjust the required air pressure.
3. Hold the broken jewelry piece, put the part that needs to be sandblasted into the sandblasting machine, align the sandblasting machine outlet, open the air pressure valve, and spray the emery on the metal jewelry piece by air pressure until it meets the requirements. The blasting position must be complete and uniform in order to achieve the effect.