Juwele nuus

groothandel 925 silver jewelry Precautions for planting wax trees in jewelry making

Geplaas op per Kingjy

Planting wax trees is the first step in forming the jewelry after its modeling is completed. It is to glue the wax film of the jewelry together one by one, like a tree. In the process of planting wax trees, the following issues should be paid attention to.

① When planting wax trees, try to avoid mixing thick and thin pieces together, because it is not easy to guarantee both at the same time during casting.

② Choose the angle between the wax piece and the wax stick according to the shape of the wax piece to ensure that the molten metal can flow calmly and quickly. Oor die algemeen, the direction of the wax mold is inclined upward. This angle can be adjusted appropriately according to the casting method, the size of the wax mold and the shape of the wax piece. In centrifugal casting, the wax mold and the wax core are at 45 na 60 degrees, and in vacuum casting, the wax mold and the wax core are at 70 na 80 degrees, which helps to control the solidification direction.

③ Before planting wax trees, the rubber chassis should be weighed. After planting the wax tree, weigh it again. Subtract the results of these two weighings to get the weight of the wax tree. The weight of the wax tree is converted into the weight of the metal according to the ratio of the density of the paraffin wax to the cast metal, and you can estimate how much metal is needed for casting. Oor die algemeen, silwer: wax=10:1; 14K: wax=14:1; 18K: wax=16:1; 22K: wax=18:1.

④ After the wax tree is finished, it is necessary to check whether the wax patterns have been welded firmly. If the welding is not strong, the wax mold will fall off during plaster casting, which will affect the casting process. Check whether the connection between the water line of the wax piece and the wax core is smooth, avoid angles or leave spaces. Ten einde laaste, check whether there is enough space between the wax molds. If the wax molds are stuck together, they should be separated; if the wax tree has dripping wax, it should be repaired with a blade.

 

OEM/ODM -juweliersware Vervaardiger Ontwerp Custom U eie juweliersware

Kom ons begin : mo@kingjy.com

 

Guangzhou -jingying fokus op pasgemaakte groothandel ringhalsbande armbande oorbelle sterling silwer 925 juweliersware,Sterling silwer vergul met 18K,14K,24K Geel goud,witgoud en roosgoud. Dit is in staat om sterling silwer juwele te pas,logo -handelsmerk of ander woorde deur lasergravure volgens die vereiste van die kliënt.

Ons maandelikse produksievermoë is tot 50,000 stuk armbande halssnoer oorbelle ring juweliersware.,Juwelierskettingwinkel,uitlaatwinkels,Juweliersware Groothandelaar,handelaars en juweliershandelsmerkonderneming,Professionele voorsiening skep aangepaste juweliersware en massaproduksie van hoë gehalte 925 Sterling silwer juweliersware diens.